QUICK CHILLERS / Blast Freezers SF 200/170-LW-E CRIO CHILL

External dimensions:

Width: 1400 mm

Depth: 1206mm

Height: 2470 mm

Internal dimensions:

Width: 780 mm

Depth: 915mm

Height: 1846 mm

Depth when open Door: 2156 mm

Temp range:

at 32 ° C UT and 55% RH (rapid cooling): +90 to +3 ° C at 32 ° C UT and 55% RH (shock freezing): +90 to -18 ° C

Refrigerant: R-452A

Capacity: 3000 g

Connected load: 9750 W / 400 V.

Blast chiller / blast freezer, self-cooled (plug is not included in delivery), retractable unit 

Combination device: shock freezing from +90 ° C to -18 ° C or rapid cooling from +90 ° C to +3 ° C 

outside and inside stainless steel 1.4301 

Rapid cooling capacity (+90 ° C to +3 ° C): 200 kg goods / cycle (max.time: 90 minutes) 

Blast freezing capacity (+90 ° C to -18 ° C): 170 kg goods / cycle (max time 240 minutes depending on product selection and loading temperature) 

Rapid cooling begins immediately after the products, which can be up to +90 ° C, have been introduced. 

Continuous operation for uncomplicated rapid cooling at +1 ° C working temperature 

Door hinge on the right, heated door frame, easily exchangeable magnetic seal (s)  

Polyurethane rigid foam insulation, 85 mm 

High-resolution, multilingual, customizable and personalizable full touch screen with calendar and image upload, USB interface for downloading HACCP data, up to 1000 freely programmable memory locations and 100 pre-installed standard programs, remaining time KI "ARTE 2.0", sensor temperature display, multi -Timer, turbo cooling circuit for continuous operation with a preselected cooling temperature 

Automatic switchover to storage cooling at the end of the cycle to +3 ° C or -18 ° C 

On-site water connection required 

The requirements and tests of DIN 18872-5 are met 

with integrated 400 V machine unit 

Interior with rounded corners, for 1 x tray trolley / shelf trolley for 20 x GN 2/1, usable area: W x D x H in mm: 765 x 900 x 1846 (tray trolley not included) 

Standard with 3-sensor core temperature probe

Note:

A connection to the on-site cooling water circuit is mandatory, minimum water pressure 1,5 bar. 

Version with flat stainless steel base. For the 

When using the hard chill and shock freezer programs, the floor under the device must be designed for temperatures down to -35 ° C. Devices with an insulating floor are available, please contact us.

Manufacturer: NordCap

Type: SF 200/170-LW-E CRIO CHILL

Special accessories:

*** 3-point sensor core temperature probe