REFRIGERATED TABLE GKTO 3-460-3T

External dimensions:

Width: 1600 mm

Depth: 630mm

Height: 610 mm

Internal dimensions:

Width: 990 mm

Depth: 530mm

Height: 360 mm

Depth when open Door: 1005 mm

Gross volume: 220 l

Temp range:

at 43 ° C UT and 60% RH: -2 to +8 ° C

Refrigerant: Expansion valve R-134a pre-installed

Connection value: 230 V.

Cooling table with convection cooling for up to 5 GN support grids 1/1 per door compartment 

corrosion-resistant central evaporator 

outside and inside stainless steel 1.4301 

socket capable 

3 doors with ergonomic handle, usable height in the compartment: 360 mm, magnetic seal (s) can be changed without tools 

Rigid polyurethane foam insulation, up to 50 mm 

electronic control with acoustic and optical HACCP control function and service alarm 

Adjustable humidity 

automatic defrosting and electrical condensate evaporation 

Installation compartment, installed on the right and pre-installed expansion valve R 134a, connection lines

downwards (suction line = 8 mm, pressure line = 6 mm, condensation water = 10 mm / with hose) 

rounded joint-free inner tub with condensation gutter (inside / outside: 28/32 mm) 

Standard per door compartment with 2 support grid holders, CNS and with 1 GN support grid 1/1, gray Rilsanized, W x D in mm: 325 x 530 

height-adjustable round stainless steel feet, 150 mm (adjustable from 125 to 175 mm)

Note:

Basic equipment with doors and without worktop. The basic variant can go through 

Worktops with or without upstands can be individually adapted to your own needs.

Manufacturer: NordCap

Type: GKTO 3-460-3T

Special accessories:

* Set of drawers, 2 x 1/2, usable height 120/120 mm

* Set of drawers, 1 x 1/1, usable height 300 mm

(460) * Worktop, folded, W x D x H in mm: 1600 x 650 x 40

* Cooling table cut-out GN 1/1

* Cooling table cut-out GN 2/1

* Cooling table cut-out GN 3/1

* CNS cover, for GN 1/1, cut-out 474020170

* CNS cover, for GN 2/1, cut-out 474020171

* CNS cover, for GN 3/1, cut-out 474020172

* Plexiglas cover, for GN 1/1, cut-out 474020170

* Plexiglass cover. for GN 2/1, cut-out 474020171

* Plexiglas cover, for GN 3/1, cut-out 474020172

* RS 485 interface connection kit, consisting of: connection cable and data readout station, for connection to external kitchen control software (software available separately, please contact us)

* Adapter cable for compressor, when connecting an on-site solenoid valve